source: trunk/docs/install/windows.rst @ 729

.. include:: <xhtml1-lat1.txt>
.. include:: <xhtml1-symbol.txt>

.. _install-onwindows:

             
Installation on Windows |trade|
====================

Compile ZOO-Project from source
-------------------------------

.. warning::
   Ensure to first perform the :ref:`prerequisite steps
   <install-prereq>` before compiling the ZOO Kernel.

The following steps are for use with the Microsoft Visual Studio
compiler (and tested with MSVC 2010).

1. Make sure the gnuwin32 tools ``bison.exe``  and ``flex.exe`` are found
   in your path.  You can download the GNUwin32 tools `here
   <http://www.zoo-project.org/dl/tool-win32.zip>`__.

2. Modify the ``nmake.opt`` file to point to your local libraries. Note
   that you can also use definition directly in the command line if
   you prefer. See :ref:`win_configure_options` for details about this
   options.

   
3. Execute:

   ::
   
     nmake /f makefile.vc
     
4. A file ``zoo_loader.cgi`` and ``libzoo_service.dll`` should be
   created.  Note that if another file named
   ``zoo_loader.cgi.manifest`` is also created, you will have to run
   another command:

   ::
   
     nmake /f makefile.vc embed-manifest
     
5. Copy the files ``zoo_loader.cgi``, ``libzoo_service.dll``  and
   ``main.cfg`` into your cgi-bin directory.

6. Using the command prompt, test the ZOO-Kernel by executing the
   following command:

   ::
   
     D:\ms4w\Apache\cgi-bin> zoo_loader.cgi
     
   which should display a message such as:
   
   ::
   
     Content-Type: text/xml; charset=utf-8
     Status: 200 OK
     
     <?xml version="1.0" encoding="utf-8"?>
     <ows:ExceptionReport xmlns:ows="http://www.opengis.net/ows/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xlink="http://www.w3.org/1999/xlink" xsi:schemaLocation="http://www.opengis.net/ows/1.1 http://schemas.opengis.net/ows/1.1.0/owsExceptionReport.xsd" xml:lang="en-US" version="1.1.0">
       <ows:Exception exceptionCode="MissingParameterValue">
         <ows:ExceptionText>Parameter &lt;request&gt; was not specified</ows:ExceptionText>
       </ows:Exception>
     </ows:ExceptionReport>
     
7. Edit the ``main.cfg`` file so that it contains values describing
   your WPS service.  An example of such a file running on Windows is:
   
   ::
   
     [main]
     encoding = utf-8
     version = 1.0.0
     serverAddress = http://localhost/
     lang = en-CA
     tmpPath=/ms4w/tmp/ms_tmp/
     tmpUrl = /ms_tmp/
     
     [identification]
     title = The Zoo WPS Development Server
     abstract = Development version of ZooWPS. See http://www.zoo-project.org
     fees = None
     accessConstraints = none
     keywords = WPS,GIS,buffer
     
     [provider]
     providerName=Gateway Geomatics
     providerSite=http://www.gatewaygeomatics.com
     individualName=Jeff McKenna
     positionName=Director
     role=Dev
     adressDeliveryPoint=1101 Blue Rocks Road
     addressCity=Lunenburg
     addressAdministrativeArea=False
     addressPostalCode=B0J 2C0
     addressCountry=ca
     addressElectronicMailAddress=info@gatewaygeomatics.com
     phoneVoice=False
     phoneFacsimile=False
     
8. Open a web browser window, and execute a GetCapababilites request on your WPS service: http://localhost/cgi-bin/zoo_loader.cgi?request=GetCapabilities&service=WPS

   The response should be displayed in your browser, such as:
   
   ::
   
     <wps:Capabilities xsi:schemaLocation="http://www.opengis.net/wps/1.0.0 http://schemas.opengis.net/wps/1.0.0/wpsGetCapabilities_response.xsd" service="WPS" xml:lang="en-US" version="1.0.0">
     <ows:ServiceIdentification>
       <ows:Title>The Zoo WPS Development Server</ows:Title>
       <ows:Abstract>
         Development version of ZooWPS. See http://www.zoo-project.org
       </ows:Abstract>
       <ows:Keywords>
         <ows:Keyword>WPS</ows:Keyword>
         <ows:Keyword>GIS</ows:Keyword>
         <ows:Keyword>buffer</ows:Keyword>
       </ows:Keywords>
       <ows:ServiceType>WPS</ows:ServiceType>
       <ows:ServiceTypeVersion>1.0.0</ows:ServiceTypeVersion>
       ...
       

.. _win_configure_options:

Build options
.............

Various build options can be set in the ``nmake.opt`` file to define
the location of the built libraries you want to use to build your
ZOO-Kernel. Some are optional and some are required, they are listed
below exhaustively:

.. contents:: 
    :local:
    :depth: 1
    :backlinks: top


gettext (Required)
******************

The location of the libintl (built when building gettext) should be
specified by defining the ``INTL_DIR`` environment variable. It
supposes that the header and the ``intl.lib`` file are available.

So for instance, in case you build the gettext in
``\buildkit\srcs\gettext-0.14.6``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set INTL_DIR=\buildkit\srcs\gettext-0.14.6\gettext-runtime\intl


libCURL (Required)
******************

The location of the libCURL should be specified by defining
the ``CURL_DIR`` environment variable. It supposes that there are 2
sub-directory ``include`` containing the libCURL header and ``lib``
which contains the ``libcurl.lib`` file.

So for instance, in case you build the libCURL in
``\buildkit\srcs\curl-7.38.0``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set CURL_DIR=\buildkit\srcs\curl-7.38.0\builds\libcurl-vc10-x86-release-dll-ssl-dll-zlib-dll-ipvs6-sspi


libFCGI (Required)
******************

The location of the libFCGI should be specified by defining the
``FCGI_DIR`` environment variable. It supposes that there are 2
sub-directory ``include`` containing the FastCGI header and
``libfcgi/Release`` which contains the ``libfcgi.lib`` file.

So for instance, in case you build the libXML2 library in
``\buildkit\srcs\fcgi-2.4.1``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set FCGI_DIR=\buildkit\srcs\fcgi-2.41.1

libXML2 (Required)
******************

The location of the libXML2 should be specified by defining the
``XML2_DIR`` environment variable. It supposes that there are 2
sub-directory ``include`` containing the libXML2 header and
``win32\bin.msvc`` which contains the ``libxml2.lib`` file.

So for instance, in case you build the libXML2 library in
``\buildkit\srcs\libxml2-2.9.0``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set XML2_DIR=\buildkit\srcs\libxml2-2.9.0

OpenSSL (Required)
******************

The location of the OpenSSL library should be specified by defining
the ``SSL_DIR`` environment variable. It supposes that there are 2
sub-directory ``inc32`` containing the header files and
``out32dll`` which contains the ``ssleay32.lib`` file.

So for instance, in case you build the libXML2 library in
``\buildkit\srcs\openssl-1.0.2c``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set SSL_DIR=\buildkit\srcs\openssl-1.0.2c

GDAL (Required)
******************

The location of the GDAL library should be specified by defining
the ``GDAL_DIR`` environment variable. It corresponds to the path
where you uncompress and built GDAL, it supposes that you have the
``gdal_i.lib`` file available in this directory.

So for instance, in case you build the libXML2 library in
``\buildkit\srcs\gdal-1.10.1``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set GDAL_DIR=\buildkit\srcs\gdal-1.10.1

MapServer (Optional)
********************

The location of the MapServer library path should be specified by
defining the ``MS_DIR`` environment variable. It corresponds to the
path where you build MapServer on your system, this directory should
contain the ``nmake.opt`` file used. 

So for instance, in case you build Python in
``\buildkit\srcs\mapserver-6.2.0``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set MS_DIR=\buildkit\srcs\mapserver-6.2.0


Python (Optional)
*****************

The location of the Python binaries path should be specified by
defining the ``PY_DIR`` environment variable. It corresponds to the
path where you build Python on your system. The location of the
``pythonXX.lib`` files should be specified by setting the
``PY_LIBRARY`` environment variable.

So for instance, in case you build Python in
``\buildkit\srcs\Python-2.7``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set PY_DIR=\buildkit\srcs\Python-2.7
    set PY_LIBRARY=\buildkit\srcs\Python-2.7\PCBuild\python27.lib

JavaScript (Optional)
*********************

The location of libmozjs should be specified by defining the
``JS_DIR`` environment variable. It corresponds to the path where you
build libmozjs on your system, it supposes that the header and
the ``mozjs185-1.0.lib`` file are available in this directory.

So for instance, in case you build libmozjs in
``\buildkit\srcs\js-1.8.5``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set JS_DIR=\buildkit\srcs\js-1.8.5

PHP (Optional)
*****************

The location of PHP should be specified by defining the ``PHP_DIR``
environment variable. It corresponds to the path where you build PHP
on your system. The location of the ``php5embed.lib`` files should be
specified by setting the ``PHP_LIB`` environment variable.

So for instance, in case you build PHP in
``\buildkit\srcs\php-5.5.10``, you may define the following before
running ``nmake /f makefile.vc``:

.. code::

    set PHP_DIR=\buildkit\srcs\php-5.5.10
    set PHP_LIB=\buildkit\srcs\php-5.5.10\Release_TS\php5embed.lib

Database backend (Optional)
***************************

ZOO-Kernel can use a database backend to store ongoing status
informations of running services, for activating this operation mode,
you should define the evironment variable ``DB`` and set it to any
value. So, to activate this option, you may use the following before
running ``nmake /f makefile.vc``:

.. code::

    set DB=activated

.. note:: 
    To learn how to setup the corresponding database, please refer to
    :ref:`this section <zoo_create_db_backend>`.




Optionally Compile Individual Services
.............................................................

An example could be the *OGR base-vect-ops* provider located in the ``zoo-project\zoo-services\ogr\base-vect-ops`` directory.  

1. First edit the *makefile.vc* located in that directory, and execute:

   ::
   
     nmake /f makefile.vc
     
   Inside that same directory, the *ogr_service.zo* file should be created.
   
2. Copy all the files inside ``zoo-services\ogr\base-vect-ops\cgi-env`` into your ``cgi-bin`` directory

3. Test this service provider through the following URL:

http://localhost/cgi-bin/zoo_loader.cgi?request=Execute&service=WPS&version=1.0.0&Identifier=Buffer&DataInputs=BufferDistance=1@datatype=interger;InputPolygon=Reference@xlink:href=http%3A%2F%2Fwww.zoo-project.org%3A8082%2Fgeoserver%2Fows%3FSERVICE%3DWFS%26REQUEST%3DGetFeature%26VERSION%3D1.0.0%26typename%3Dtopp%3Astates%26SRS%3DEPSG%3A4326%26FeatureID%3Dstates.15
   
   The response displayed in your browser should contain:
   
   ::
   
     <wps:ProcessSucceeded>Service "Buffer" run successfully.</wps:ProcessSucceeded>