.. _install-installation: Installation on Unix/Linux ========================== To build and install ZOO-Project on your Web Server you will need 4 steps : .. contents:: :local: :depth: 1 :backlinks: top Build cgic ---------- Run the following commands from the ``thirds/cgic`` directory to build the cgic library. :: cd thirds/cgic make The cgic library originaly come from `http://www.boutell.com/cgic `_. .. warning:: You may need to edit the ``Makefile`` in case you are using a 64 bits platform for building and your fcgi library is not located in ``/usr/lib64``. Install ZOO-Kernel ------------------ For the impatient ................. Run the following commands from the directory where you :ref:`install-download` and extracted the ZOO Kernel source code in order to build the ``zoo_loader.cgi`` CGI program with default options. :: cd zoo-project/zoo-kernel autoconf ./configure make make install This should produce executables for the *zoo_loader.cgi* CGI program (located per default in ``/usr/lib/cgi-bin/``) and a shared library ``libzoo_service`` (located per default in ``/usr/local/lib``). .. warning:: Edit ZOO-Kernel installation settings in the ``main.cfg`` file (set ``tmpPath`` and ``tmpUrl`` to fit your web server configuration). Configure options ................. This section provides information on :ref:`kernel_index` configure options. It is recommanded to also read the :ref:`kernel_config` section for configuration technical details. Here is the list of available options in the same order as returned by ``./configure --help`` command: .. contents:: :local: :depth: 2 :backlinks: top Specific CGI Directory ********************** In the case your ``cgi-bin`` is not located in ``/usr/lib/`` as it is assumed per default, then you can specify a specific target location by using the following option: .. code:: ./configure --with-cgi-dir=/Lbrary/WebServer/CGI-Executables This way, when you will run the ``make install`` command, the ZOO-Kernel will be deployed in the specified directory (so, `/Lbrary/WebServer/CGI-Executables`` in this example). Specific main.cfg location (Optional) ************************************** Per default, the ZOO-Kernel search for the ``main.cfg`` file from its installation directory but, in case you want to store this file in another place, then you can use the ``--with-etc-dir`` option so it will search for the ``main.cfg`` file in the ``sysconfdir`` directory. For instance, you can define that the directory to store the ``main.cfg`` file is the ``/etc/zoo-project`` directory, by using the following command: .. code:: ./configure --with-etc-dir=yes --sysconfdir=/etc/zoo-project .. _zoo_install_db_backend: Use a Database Backend (Optional) ********************************** If you want to share the ongoing informations of running services between various ZOO-Kernel instances then you should use this option: ``--with-db-backend``. This way, both the *GetStatus*, *GetResult* and *Dismiss* requests can be run from any host accessing the same database. Obviously, this will require that the ZOO-Kernel is able to access the Database server. To learn how to configure this connection and how to create this database please refer to :ref:`[1] ` and :ref:`[2] ` respectively. .. note:: By now, the ZOO-Kernel is not able to handle correctly the *Dismiss* request from any host. Nevertheless, it will provide valid response from any host, but only the host which is really handling the service will be able to stop it and remove all the linked files. .. _zoo_create_db_backend: To create a new database to be used by the ZOO-Kernel, you have to load the `schema.sql `_ file. For instance, you may run the following: .. code:: createdb zoo_project psql zoo_project -f zoo-project/zoo-kernel/sql/schema.sql .. note:: You can choose another schema to store ZOO-Kernel specific informations. In such a case, you would need to edit the schema.sql file to uncomment line `33 `_ and `34 `_. .. _zoo_create_metadb: Metadata Database (Optional) ***************************** It is possible to use a PostgreSQL database to store metadata information about WPS Services. This support is optional and require to be activated by using the ``--with-metadb=yes`` option. To create the database for storing the metadata informations about the WPS Services, you may use the following command: .. code:: createdb zoo_metadb psql zoo_metadb -f zoo-project/zoo-kernel/sql/zoo_collectiondb.sql In case you want to convert an existing zcfg file then, you can use the ``zcfg2sql`` tool from the command line. It can be found in ``thirds/zcfg2sql`` and can be build simply by running the ``make`` command. After compilation you only need to give it the path of the zcfg file you want to obtain the SQL queries required to store the metadata informations in the database rather than in zcfg file. For instance you may use the following command: .. code:: #Direct import in the zoo_metadb database ./zcfg2sql /Path/To/MyZCFGs/myService.zcfg | psql zoo_metadb #Create a SQL file for a futur import ./zcfg2sql /Path/To/MyZCFGs/myService.zcfg > myService.sql YAML Support (Optional) ************************ If ``yaml.h`` file is not found in your ``/usr/include`` directory and ``libyaml.so`` is not found in ``/usr/lib``, a ``--with-yaml`` option can be used to specify its location. For instance, if the header file lies in ``/usr/local/include`` and the shared library is located in ``/usr/local/lib``, you may use the following command: :: $ ./configure --with-yaml=/usr/local FastCGI Support (Required) *************************** If your FastCGI library is not available in the default search path, a ``--with-fastcgi`` option can be used to specify its location. For instance, if ``libfcgi.so`` lies in ``/usr/local/lib`` which is not in your ``LD_SEARCH_PATH``, you may use the following command: :: $ ./configure --with-fastcgi=/usr/local GDAL Support (Required) ************************ If gdal-config program is not found in your ``PATH``, a ``--with-gdal-config`` option can be used to specify its location. For instance, if ``gdal-config`` lies in ``/usr/local/bin`` which is not in your ``PATH``, you may use the following command: :: $ ./configure --with-gdal-config=/usr/local/bin/gdal-config GEOS Support (Optional) ************************ If ``geos-config`` program is not found in your ``PATH``, a ``--with-geosconfig`` option can be used to specify its location. For instance, if ``geos-config`` lies in ``/usr/local/bin`` which is not in your ``PATH``, you may use the following command: :: $ ./configure --with-geosconfig=/usr/local/bin/geos-config CGAL Support (Optional) ************************ If ``CGAL/Delaunay_triangulation_2.h`` program is not found in your ``/usr/include`` directory, a ``--with-cgal`` option can be used to specify its location. For instance, if the file lies in ``/usr/local/include`` which is not in your PATH, you may use the following command: :: $ ./configure --with-cgal=/usr/local MapServer Support (Optional) ***************************** In order to activate the WMS, WFS and WCS output support using MapServer, the ``--with-mapserver`` option must be used. The path to ``mapserver-config`` which is located in the source code of MapServer must also be set, using the following command: :: $ ./configure --with-mapserver=/path/to/your/mapserver_config/ Read more about the :ref:`kernel-mapserver`. XML2 Support (Required) ************************ If xml2-config program is not found in PATH, a *--with-xml2config* option can be used to specify its location. For instance, if xml2-config is installed in ``/usr/local/bin`` which is not in PATH, you may use the following command: :: $ ./configure --with-xml2config=/usr/local/bin/xml2-config OGC API - Processing Support (Optional) **************************************** In case you want to activate the support for `OGC API - Processing `__, you can do so by using the *--with-json*: You will then need to coy the ``oas.cfg`` file in the same directory as your ``main.cfg``. For instance, one may use the following command: :: $ ./configure --with-json=/usr/ Python Support (Optional) ************************** The ``--with-python=yes`` option is required to activate the :ref:`kernel_index` Python support, using the following command: :: $ ./configure --with-python=yes This assumes that python-config is found in your ``PATH``. If not, then you can specify the Python installation directory using the following command (with Python installed in the ``/usr/local`` directory): :: $ ./configure --with-python=/usr/local Python Version ############## If multiple Python versions are available and you want to use a specific one, then you can use the ``--with-pyvers`` option as shown bellow: :: $ ./configure --with-pyvers=2.7 .. _js-support: JavaScript Support (Optional) ****************************** In order to activate the JavaScript support for ZOO-Kernel, the ``--with-js=yes`` configure option must be specified. If you are using a "Debian-like" GNU/Linux distribution then dpkg will be used to detect if the required packages are installed and you don't have to specify anything here. The following command is only needed (assuming that js_api.h and libmozjs.so are found in default directories): :: $ ./configure --with-js=yes If you want to use a custom installation of `SpiderMonkey `__ , or if you are not using a Debian packaging system, then you'll have to specify the directory where it is installed. For instance, if SpiderMonkey is in ``/usr/local/``, then the following command must be used: :: $ ./configure --with-js=/usr/local PHP Support (Optional) *********************** The ``--with-php=yes`` option is required to activate the :ref:`kernel_index` PHP support`, using the following command: :: $ ./configure --with-php=yes This assumes that ``php-config`` can be found in the ``/bin`` directory . So, supposing the your ``php-config`` can be found in ``/usr/local/bin``, then use the following command: :: $ ./configure --with-php=/usr/local .. warning:: ZOO-Kernel optional PHP support requires a local PHP Embedded installation. Read more `here `__. Java Support (Optional) ************************ In order to activate the Java support for ZOO-Kernel, the `--with-java` configure option must be specified and sets the installation path of your Java SDK. For instance, if Java SDK is installed in the ``/usr/lib/jvm/java-6-sun-1.6.0.22/`` directory, then the following command can be used: :: $ ./configure --with-java=/usr/lib/jvm/java-6-sun-1.6.0.22/ This assumes that the ``include/linux`` and ``jre/lib/i386/client/`` subdirectories exist in ``/usr/lib/jvm/java-6-sun-1.6.0.22/``, and that the ``include/linux`` directory contains the ``jni.h`` headers file and that the ``jre/lib/i386/client/`` directory contains the ``libjvm.so`` file. .. note:: You can use the `--with-java-rpath` option to produce a binary aware of the libjvm location. .. note:: With Mac OS X you only have to set *macos* as the value for the ``--with-java`` option to activate Java support. For example: :: $ ./configure --with-java=macos Perl Support (Optional) ************************ The ``--with-perl=yes`` option can be used for activating the ZOO-Kernel Perl support, as follow: :: $ ./configure --with-perl=yes This assumes that perl is found in your PATH. For instance, if Perl is installed in ``/usr/local`` and ``/usr/local/bin`` is not found in your ``PATH``, then the following command can be used (this assumes that ``/usr/local/bin/perl`` exists): :: $ ./configure --with-perl=/usr/local Orfeo Toolbox Support (Optional) ********************************* In order to activate the optional Orfeo Toolbox support, the ``--with-otb`` option must be used, using the following command: :: $ ./configure --with-otb=/path/to/your/otb/ Read more about the :ref:`kernel-orfeotoolbox`. .. warning:: To build the Orfeo Toolbox support you will require ITK, the default version of ITK is 4.5, in case you use another version, please make sure to use the ``--with-itk-version`` to specificy what is the version available on your system. SAGA GIS Support (Optional) **************************** In order to activate the optional SAGA GIS support, the *--with-saga* option must be used, using the following command: :: $ ./configure --with-saga=/path/to/your/saga/ Read more about the :ref:`kernel-sagagis`. .. warning:: In case wx-config is not in your ``PATH`` please, make sure to use the ``--with-wx-config`` to specify its location. Translation support (Optional) ****************************** The ZOO-Kernel is able to translate the messages it produces in different natural languages. This requires that you download `the messages file `_ translated in your language, if any. Then, for this translation support to work, you have to generate manually the requested file on your system. For instance for the French translation, you may use the following command: .. code:: msgfmt messagespo_fr_FR.utf8.po -o /usr/share/locale/fr/LC_MESSAGES/zoo-kernel.mo The ZOO-Kernel is also able to handle translation of ZOO-Services. Please, refer to :ref:`this document ` for more details on the procedure to add new ZOO-Service translation files. .. warning:: The location of the final ``.mo`` file may vary depending on your system setup. Install ZOO-Services -------------------- .. warning:: We present here a global installation procedure for basics ZOO-Services, for details about automatic installation of services provided by :ref:`kernel-orfeotoolbox` or :ref:`kernel-sagagis`, please refer to there specific documentations. Depending on the programming language used to implement the ZOO-Services you want to install, you will need to build a Services Provider. In the case of *C* and *Fotran*, you would create a shared library exporting the functions corresponding to all the ZOO-Services provided by this Services Provider. In case of *Java*, you will need to build a Java Class. In any other programming language, you should simply have to install the ServiceProvider and the zcfg files. If building a Shared library or a Java class is required, then you should find a ``Makefile`` in the service directory which is responsible to help you build this Services Provider. So you should simply run the `make` command from the Service directory to generate the required file. Then you simply need to copy the content of the ``cgi-env`` directory in ``cgi-bin``. To install the ``ogr/base-vect-ops`` Services Provider, supposing that your ``cgi-bin`` directory is ``/usr/local/lib`` use the following commands: .. code:: cd zoo-project/zoo-services/ogr/base-vect-ops make cp cgi-env/*.* /usr/lib/cgi-bin .. note:: You may also run ``make install`` directly after ``make``. To install the hello-py Services Provider, use the following commands: .. code:: cd zoo-project/zoo-services/hello-py/ cp cgi-env/* /usr/lib/cgi-bin Testing your installation ------------------------- To test your installation yous should first be able to run the following command from the ``cgi-bin`` directory: .. code:: ./zoo_loader.cgi "request=GetCapabilities&service=WPS"